Skip to content
BasketOrder package
Your path to becoming a nano-insulation expertBeginner0 %

Thermal protection · rethought

The vacuum layer for your home.Not thicker. Insulate smarter.

In older buildings, over 60 % less heat demand: 1 mm insulating coating with ceramic vacuum nanospheres instead of 15 to 20 cm of polystyrene.

Cross-section of a wall: cold outside, warm inside, the nanosphere layer in the magnifierCold outsideWarm inside
  • 1 mm instead of 15 to 20 cm
  • TÜV NORD Verified Product
  • Made in EU
  • 25-year warranty included in the complete package

You can see the price for your home instantly in the calculator; figures are guide values, not a commitment for a specific building.

1 mmLayer thickness
25 yearsWarranty with the complete package and a certified partner installer
Over 5,000,000 m²already successfully insulated with our system

TECHNOLOGY · 3D

From the outside. To the inside.

Three stations, one journey: the wall becomes a layer, the layer becomes a sphere. Keep scrolling – dragging rotates each model freely through 360 degrees.

01 · THE WALL02 · THE LAYER03 · THE SPHERE

Everything begins at the surface.One layer. Many perspectives.A look inside.

One wall, one coating. The highlighted layer shows where our journey into the material structure begins.

The wall steps back. A freely arranged sphere packing makes the spatial structure of the layer explorable.

A single sphere opens up. Light shell, dark interior: the structure becomes visible as a spatial cross-section model.

SURFACESchematic enlargement
01 · The wall

Everything begins at the surface.

One wall, one coating. The highlighted layer shows where our journey into the material structure begins.

Surface · Schematic enlargement
MATERIAL STRUCTURESchematic enlargement
02 · The layer

One layer. Many perspectives.

The wall steps back. A freely arranged sphere packing makes the spatial structure of the layer explorable.

Material structure · Schematic enlargement
CROSS-SECTION MODELSchematic enlargement
03 · The sphere

A look inside.

A single sphere opens up. Light shell, dark interior: the structure becomes visible as a spatial cross-section model.

Cross-section model · Schematic enlargement

Surface · Schematic enlargementMaterial structure · Schematic enlargementCross-section model · Schematic enlargement

LEARNING STUDIO

Become a nano-insulation expert.

Four lessons, explained in a playful way: from the nanosphere via the Knudsen lab to how it works on the wall. After each task you see where you stand. At 100%, your own house awaits.

02 / PRODUCTS

For every surface. The right system.

Brick wall, coated white with PScoat on the right, paint roller applying itVIEW THE PACKAGE BUCKETS ↓

FAÇADE

PSC 250T
BUILD

Main layer of the facade system: flexible, insulating coating, also suitable for older buildings.

Pack size
18 l
System position
Main layer
Consumption
approx. 1 l/m² at 1 mm
Check availability in your country All product data at pscoat.us ↗

Primer, main layer and finish.
The product lines at a glance. [1]

3D SYSTEM VIEW

LAYER BUILD-UP

    Layer thicknesses are documented to scale only for the facade system. The primer depends on the substrate.

    THE SYSTEM BUILD-UP

    Matched to one another.

    1. 01
      PrimeECB BASIC A / BASIC B
    2. 02
      CoatBUILD / ECI / ECR / HP
    3. 03
      FinishECO OUTSIDE / EC

    PACKAGES FOR ROOF, INTERIOR AND PLANT ENGINEERING

    ROOF

    Roof package

    Sheet metal and roof

    The roof system as a package: primer, insulating layer and roof coating.

    Basic A · HP · ECR Roof · 3 buckets

    INTERIOR

    Interior package

    Vapour-permeable

    The interior system as a package: primer and vapour-permeable interior insulation for walls and ceilings.

    Basic B · ECI Interior · 2 buckets

    INDUSTRIAL PLANT

    Plant engineering package

    Metal materials

    The system for plant engineering: primer, technical insulation for pipework, tanks and plant, and top coat.

    Basic A · HP · EC · 3 buckets

    Tap a bucket. The product links appear below.

    All details at pscoat.us/produkt. Prices and availability in the shop. All products at pscoat.us ↗

    Compare all products 7 products
    Product overview from pscoat.us. Pack sizes and availability depend on the country.
    ProductApplicationSystem positionPack size
    PSC 250T BUILDFacadeMain layer18 l
    PSC 250T ECR ROOFRoofMain layer18 l
    PScoat ECI INTERIORInteriorMain layer18 l
    PSC 250T HPIndustrial plantsMain layer18 l
    PSC 250T ECO OUTSIDEFacadeFinish18 l
    PSC 250T ECB BASIC ASubstrate preparationPrimer5 l
    PSC 250T ECB BASIC BSubstrate preparationPrimer5 l
    Product comparison at pscoat.us ↗
    Facade packages

    Four packages, four insulation goals

    Which package fits depends on what the building needs to achieve. The first three include the material for the complete build-up; the fourth also includes application by a specialist contractor. With a U-value guarantee on every package.

    A residential building whose left half is rendered as a thermos flask — the coating keeps the warmth inside the building instead of making the wall thicker.

    Orderable from 1 m² per package. Orders below 50 m² are dispatched from the Ketsch warehouse: shipping abroad from €97, with an additional €18 decanting fee if the order is not an exact multiple of 18 m². You can see the exact shipping costs for your country in the cart. Prices per square metre of facade, including VAT. The first three packages cover the material without application; PScoat Komplett includes application by a specialist contractor and is billed after measurement. The U-values apply to the respective system build-up; we provide a U-value guarantee on every package.

    Order package Enquire about a build-up for your property

    03 / Benefits

    Twelve reasons. Each one to read up on.

    All twelve points are linked: each one leads straight to the matching section, the calculator or the document.

    01

    Warmer wall, lower risk of mould

    Higher surface temperature of the interior wall, see the property examples.

    02

    Rolled or sprayed

    Vapour-permeable, water-repellent, UV-resistant and elastic. Adheres to concrete, plaster, masonry, clinker brick and fibre cement. Standard white or RAL colours.

    03

    Inside, outside and on the roof

    Dedicated lines for facade, interior and roof. For new builds and older buildings.

    04

    The facade stays as it is

    Only about 1 mm of coating: profiles, reveals and the original look are preserved.

    06

    U-value guarantee

    For every package, a U-value guaranteed in writing, tied to the system build-up and verifiable after the job.

    07

    Online calculator

    U-value, savings, payback and heat loss as a first estimate for your building.

    08

    Trained professional applicators

    Painting and trade companies receive product training and can apply to become a sales partner or applicator.

    09

    Made in EU

    Produced by partners in the Czech Republic and Poland. Internationally established for 15 years, more than 5 million m² coated.

    10

    Proven in industry

    In use in industry, energy, chemicals and automotive manufacturing in several countries.

    11

    Apply instead of mounting boards

    The coating is applied with a roller, brush or airless sprayer: primer and two thin coating layers totalling about 1 mm. The processing instructions in the technical data sheets are authoritative.

    04 / Evidence

    Don't just look.Look it up.

    Property examples, test reports and documents – each relating to the specific property.

    Property · built 1890> 60 %lower annual heating demand

    A drop from around 40,000 to under 15,000 kWh per year.

    View measurement ↗
    Property · built 1960 · multi-family house2,63 → 0,096U-value of the exterior wall in W/(m²K)

    Interior wall temperature of this property: 13.0 → 19.7 °C.

    Property study (PDF) ↗
    Property · built 190012.9 → 19 °CInterior wall surface temperature

    At 0 °C outside and 20 °C inside; starting value close to the range in which mould can form.

    Test rig · 24 hours> 100 mmPolystyrene outperformed

    At 20 °C inside and −20 °C outside, PScoat reduced energy demand more than 100 mm of polystyrene insulation.

    Packages · U-value guaranteeEasy, Plus or Premium?The system build-up decides

    Easy approx. 0.8 · Plus approx. 0.2 · Premium approx. 0.11 W/(m²K), guaranteed in writing for each package.

    Go to the check for your building ↗

    Measured on documented properties. In the documented houses, the interior wall temperature rose from about 12 to about 19 °C at outdoor temperatures of 0 to 5 °C; on average 50–70% less heating energy (facade and top-floor ceiling coated). Your result depends on the building and the system build-up; the online calculator shows the figure for your home.

    CE marking

    CE to EN 15824

    The basis is the declaration of performance PSC250T-2026-01 (System 3), tested by the accredited laboratory EFEKT in Zabrze.

    • Water vapour permeability V1
    • Water absorption W3
    • Pull-off adhesion on concrete and steel, also after 20 freeze-thaw cycles
    • Fire class B-s1,d0
    TÜV NORD · Verified Product

    What TÜV NORD tested

    “Verified Product” procedure of TÜV NORD Polska Sp. z o.o. for the PSC 250T product family, test mark ID 141649.

    • Bulk density
    • pH value
    • Water vapour permeability
    • Water absorption
    • VOC content
    • Pull-off adhesion strength
    • Reaction to fire

    Each document applies only to the named product, the test set-up and the scope tested. cert.tuv-nord.pl ↗

    The documents. Directly accessible.

    PDFData sheets, system manuals, safety data sheets, declaration of performanceClick to expand
      Insulation materials compared by thickness

      Documented product examples, based exclusively on publicly available manufacturer data. The same thermal resistance R is compared – this is not a ranking and not proof of identical performance in the building.

      Product / Sourceλ [W/(m·K)]Deviation from PScoat 1 mmCalculated thickness [mm]Available thicknesses [mm]

      Calculated thickness d = R × λ with R = 2.461 m²K/W (PScoat model at 1 mm). Deviation = (d − 1 mm) / 1 mm. Yellow below 100%, orange 100% to below 200%, red from 200%. Model calculation; does not replace a building component calculation.

      05 / Your building

      From an idea.To a project.

      Start with your address. The address calculator runs right here (currently in English); further calculators open on powersmartcoat.com in a new tab.

      Address calculator

      Calculate savings and U-value

      Enter an address: the calculator shows your building in 3D (photo model in NRW and Hamburg, otherwise 3D satellite view), measures the façade and calculates the U-value, savings and payback for Easy, Plus and Premium.

      The calculator appears in the language of the page (German, English, French, Spanish, Italian, Dutch, Polish, Czech, Portuguese, Turkish, Greek, Ukrainian), otherwise in English. Windows on walls without a photo are an estimate (average 19.8 % of the wall area), not actual window positions.

      01Your building in 3DEstimate the facade area from open data

      OPEN DATA PREVIEW

      Your building in 3D.
      From open data.

      Estimate the facade area from open map data and, where available, from official building data. Then explore the building model.

      • Official 3D building models (LoD2) for North Rhine-Westphalia, Hesse and Bavaria
      • Otherwise official building footprints, with OpenStreetMap as a fallback
      • Netherlands via 3D BAG

      The preview tool is currently in German. Coverage and level of detail vary by location; the estimated number of floors can be adjusted. With “Open building calculator” you go straight to the address calculator; your address is copied to the clipboard so that you only have to paste it there.

      EXAMPLE BUILDING · 3D
      2 storeys
      Gross facade area≈ 272 m²

      Drag to rotate · Example 12 × 9 m, 2.9 m per floor, no real data queried

      02Material requirementArea excluding windows and doors

      Windows and doors are deducted so that you do not order too much.

      Area to be coated
      120 m²
      03More calculatorsSavings, U-value, heat loss, climate
      In the feature

      CNN Prima Newsreports on PScoat.

      YouTube is only loaded once you tap Play. Open directly on YouTube ↗

      06 / References

      Beyond buildings.In practice.

      A selection from the reference list. Tapping pauses the ticker, a second tap opens the company's website. The arrow opens the reference letter.

      07 / Contact

      Your next step.Starts with a question.

      Are you planning a project, want to become a sales partner or get started as a processor? The form also applies to countries with their own PScoat website.

      Your enquiry

      Fields marked with * are required.

      Certificates & markings

      CE to EN 15824 · TÜV NORD Verified Product · U-value guarantee per package

      Switzerland – country siteMade in EU – find your countryKfW – domestic fundingCE marking – more about CE marking at the EU
      TÜV NORD Verified Product – “Product tested” mark, certificate 141649

      What TÜV NORD tested

      Under the ‘Verified Product’ procedure of TÜV NORD Polska Sp. z o.o., the following parameters were tested and confirmed for the PSC 250T product family:

      • Volumetric density
      • pH value
      • Water vapour permeability
      • Water absorption
      • VOC content
      • Pull-off adhesion strength
      • Reaction to fire

      The certificate is available on request: info@powersmartcoat.de · cert.tuv-nord.pl (ID 141649)

      Live chat WhatsApp